The SmallRig 2916 side handle review is for filmmakers building a compact camera rig who want a dedicated side grip that can move to suit their setup.
Its cage-specific screw mounting, reversible hand orientation, and modest size make compatibility and preferred grip position the key checks before buying.
SmallRig 2916 Handle Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig 2916 Mini Side Handle
A compact cage-mounted grip for mirrorless and small-camera filmmakers who want adjustable hand placement and mounting points for a few accessories.
- Designed for cages used with mirrorless, digital, and other small cameras.
- Attaches with two 1/4-20 screws, with 18 mm spacing between the cage’s threaded holes.
- Can be switched between left- and right-hand orientation and adjusted up or down.
- Constructed from aluminum alloy and PC+ABS plastic.
Pros
- Reversible orientation supports either left- or right-hand operation.
- Vertical adjustment helps position the grip against different cage heights.
Consider before buying
- Requires a cage with two 1/4-20 threaded holes spaced 18 mm apart.
- The mini size may feel too small for buyers who prefer a larger grip.
Read the full review summary
The 2916 is a small side handle for mirrorless, digital, and other small cameras fitted with a cage.
It attaches through two 1/4-20 screws spaced 18 mm apart, and its built-in wrench supports changing the handle’s direction for left- or right-hand use. The handle can also slide up and down for positioning against different cage heights.
Its 139 g weight and aluminum alloy with PC+ABS construction suit a rig where a compact grip matters. A cold shoe and eyelet add ways to attach accessories, while the stated maximum bearing capacity is 3.5 kg.
This is a focused grip rather than a larger handle: consider it if its mounting pattern and size fit your cage and shooting style.
The buying factors
SmallRig 2916 Handle Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Cage compatibility
The two-screw mount is clearly specified, but the cage needs matching 1/4-20 holes at an 18 mm spacing.
Handedness adjustment
The handle can be reversed for left- or right-hand use, with a built-in wrench for the change.
Position adjustment
It slides up and down to adapt its placement to different cage heights.
Rig weight
At 139 g, it is a compact addition for buyers keeping their camera setup light.
Accessory mounting
A cold shoe and eyelet provide two useful attachment points, though the handle’s main role is grip.
Grip size
The mini format suits compact builds; buyers seeking a larger handle should consider the physical size carefully.
Key Features and Specifications of SmallRig 2916 Handle
- Designed for cages used with mirrorless, digital, and other small cameras.
- Attaches with two 1/4-20 screws, with 18 mm spacing between the cage’s threaded holes.
- Can be switched between left- and right-hand orientation and adjusted up or down.
- Constructed from aluminum alloy and PC+ABS plastic.
- Includes a cold shoe for a flash or microphone and an eyelet for a wrist strap.
- Weighs 139 g and has a maximum bearing capacity of 3.5 kg.
Pros and Cons of SmallRig 2916 Handle
Pros
- Reversible orientation supports either left- or right-hand operation.
- Vertical adjustment helps position the grip against different cage heights.
- Lightweight, compact form fits smaller camera rigs.
- Cold shoe and eyelet offer additional accessory attachment options.
Consider before buying
- Requires a cage with two 1/4-20 threaded holes spaced 18 mm apart.
- The mini size may feel too small for buyers who prefer a larger grip.
- Its 3.5 kg maximum bearing capacity calls for checking the planned setup’s load.
Who Should Buy SmallRig 2916 Handle?
Good fit
Consider the SmallRig 2916 if you already use a compatible camera cage and want a compact side grip that can be set for either hand.
Before choosing it, check that the cage has the required pair of threaded holes at 18 mm spacing and that the handle’s small format suits your grip preference.
It is also a practical fit when you want a cold shoe for a flash or microphone, or an eyelet for a wrist strap.
Keep the complete supported load within the 3.5 kg maximum, and think through where you want the grip to sit before assembling the rig.
Who should skip it
Look elsewhere if your cage does not have the specified two-hole mounting pattern, or if you want a larger handle.
Buyers planning to place more than 3.5 kg on the handle should choose a support designed for that load.
What to Check in the SmallRig 2916 Handle
Start with the cage connection
This handle depends on a precise mounting arrangement: two 1/4-20 threaded holes with 18 mm between them.
Confirm both the thread size and spacing on your cage before buying; a general resemblance to the listed pattern is not enough to establish a fit.
Set the grip for your shooting hand
The handle can be changed from one side of the cage to the other by removing the connection part and changing its direction.
Its built-in wrench supports the change, while the up-and-down adjustment lets you choose a position along the cage. These adjustments make it easier to plan a setup around hand preference and cage height.
Match its size and load to the rig
At 139 g, the mini handle adds a grip without becoming a large part of the build.
The 3.5 kg maximum bearing capacity gives a clear upper limit for the load it is intended to bear, so account for the camera and attached equipment when assessing your configuration.
Use the extra attachment points selectively
The cold shoe can take a flash or microphone, and the eyelet can take a wrist strap. Those are useful options on a compact build, but they do not change the handle’s primary role as a cage-mounted grip.
Decide which attachments you need and whether their placement works with your camera setup.
Alternatives to SmallRig 2916 Handle
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 3766 Lightweight NATO Top Handle
Choose the 2916 when you want a side grip and your cage has the matching screw pattern.
Consider the 3766 when a top grip and its NATO rail mounting suit your rig; verify that your cage has a NATO rail, which is sold separately.
- The 3766 is a top handle that mounts to a NATO rail, weighs 124 g, and includes five cold shoes plus ten 1/4-inch and two 3/8-inch threaded holes.
- It is specified to support up to 10 kg.
- The 2916 is a side grip that mounts to two 1/4-20 cage holes spaced 18 mm apart and can be reversed for either hand.
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 2158 Universal Magic Arm
The 2916 is the more direct choice for a hand-held side grip on a compatible cage. Consider the 2158 if your goal is to position a monitor or video light at an adjustable angle using 1/4-inch connections.
- The 2158 is a two-piece universal magic-arm set with 1/4-inch screws at both ends and a middle wingnut for setting accessory angles.
- It is not described as a side handle.
- The 2916 is a hand grip for a camera cage, with reversible orientation and up-and-down positioning.
Is SmallRig 2916 Handle Worth It?
The SmallRig 2916 is worth considering for a compact camera rig if your cage matches its two-hole, 18 mm mounting pattern and you want a reversible side grip with a little vertical adjustment.
Its light weight, cold shoe, and wrist-strap eyelet add practical flexibility.
Check the mini size and 3.5 kg maximum bearing capacity against your hands and planned setup before buying. If those fit your needs, it offers a focused, adjustable handle for a compatible cage.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig 2916 Mini Side Handle
A compact cage-mounted grip for mirrorless and small-camera filmmakers who want adjustable hand placement and mounting points for a few accessories.
- Designed for cages used with mirrorless, digital, and other small cameras.
- Attaches with two 1/4-20 screws, with 18 mm spacing between the cage’s threaded holes.
- Can be switched between left- and right-hand orientation and adjusted up or down.
- Constructed from aluminum alloy and PC+ABS plastic.