Product Reviews

SMALLRIG 6314 Adjustable Camera Monitor Mount Review

A compact, angle-adjustable monitor mount for camera-rig users who need landscape or portrait positioning and compatible anti-twist connections.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Adjustable Camera Monitor Mount review centers on a compact 6314 designed to position a monitor on a camera cage, top handle, or another compatible support.

Its 360-degree pan, 180-degree tilt, and locating interfaces suit creators who want flexible orientation without adding a long articulating arm.

SMALLRIG 6314 Mount Review Summary

The quick verdict

SMALLRIG 6314 Adjustable Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SMALLRIG 6314 Adjustable Camera Monitor Mount

A compact, angle-adjustable monitor mount for camera-rig users who need landscape or portrait positioning and compatible anti-twist connections.

  • Model 6314 monitor mount for compatible monitors and accessories attached through a 1/4-inch-20 threaded hole or locating hole.
  • Designed to mount on a camera cage, top handle, or another support accessory.
  • Top retractable 1/4-inch-20 locating screw, locating pins, and silicone pad for compatible monitor connections.
  • Bottom 3/8-inch-16 locating screw for an ARRI locating hole.

Pros

  • Supports broad panning and tilting, with portrait mounting available while retaining tilt adjustment.
  • Uses locating features at both the monitor and support ends to help resist twisting in compatible setups.

Consider before buying

  • The mount depends on specific threaded or locating interfaces, so it will not be a universal fit for every cage, handle, or monitor.
  • The product information gives no load capacity; buyers with a heavier monitor should confirm suitable support and tightening requirements before relying on it.
Read the full review summary

The 6314 combines adjustment and mounting security in a small monitor support.

Its retractable 1/4-inch-20 locating screw, locating pins, and silicone pad at the top are intended to help secure compatible monitors, while the bottom 3/8-inch-16 ARRI locating screw is made for a matching locating hole.

A thumb knob handles setup, and an included L-shaped Allen wrench offers additional tightening.

Its most distinctive use case is switching a mounted monitor between landscape and portrait orientation while retaining tilt adjustment.

The mount is a practical fit for a camera rig with compatible attachment points and a monitor interface matching its stated screw or locating-hole options.

Before buying, check the exact interfaces on both your support and monitor; the product description names examples but does not cover every setup.

The buying factors

SMALLRIG 6314 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Angle flexibility

A full 360-degree pan and 180-degree tilt offer broad positioning, including vertical monitor mounting.

8/10

Mounting security design

Locating features appear at both ends, with a silicone pad and an option for additional tightening.

9/10

Orientation options

The design explicitly supports both horizontal and vertical installations.

8/10

Setup convenience

A thumb-operated knob aids mounting and tilt adjustment; the included wrench allows additional tightening.

7/10

Rig compatibility

The specified locating and threaded interfaces fit particular setups, so buyers should verify their gear's connection points.

8/10

Portability

At 75.6 grams, it adds little listed weight to a camera support system.

Key Features and Specifications of SMALLRIG 6314 Mount

  • Model 6314 monitor mount for compatible monitors and accessories attached through a 1/4-inch-20 threaded hole or locating hole.
  • Designed to mount on a camera cage, top handle, or another support accessory.
  • Top retractable 1/4-inch-20 locating screw, locating pins, and silicone pad for compatible monitor connections.
  • Bottom 3/8-inch-16 locating screw for an ARRI locating hole.
  • 360-degree pan and 180-degree tilt, with support for landscape and portrait monitor orientations.
  • Thumb-adjustable tilt damping and a thumb-operated mounting knob; an L-shaped Allen wrench is included for additional tightening.
  • Made from black anodized aluminum alloy and stainless steel; listed weight is 75.6 grams.

Pros and Cons of SMALLRIG 6314 Mount

Pros

  • Supports broad panning and tilting, with portrait mounting available while retaining tilt adjustment.
  • Uses locating features at both the monitor and support ends to help resist twisting in compatible setups.
  • The silicone pad helps protect the monitor contact surface from scratches.
  • Thumb controls make routine positioning accessible without relying on the included wrench for every adjustment.
  • Lightweight construction is suited to rigs where accessory weight matters.

Consider before buying

  • The mount depends on specific threaded or locating interfaces, so it will not be a universal fit for every cage, handle, or monitor.
  • The product information gives no load capacity; buyers with a heavier monitor should confirm suitable support and tightening requirements before relying on it.
  • Its compact support design does not describe an extended arm, so it may not provide the reach needed to move a monitor away from the camera rig.

Who Should Buy SMALLRIG 6314 Mount?

Good fit

Consider the SMALLRIG 6314 if your rig has a compatible 3/8-inch-16 ARRI locating hole and your monitor can connect through the listed 1/4-inch-20 threaded or locating interface.

Its combination of pan, tilt, and landscape or portrait placement is useful when framing or camera orientation changes during a shoot.

It also makes sense if you value a compact mount with locating features and a silicone contact pad.

The thumb-operated controls support quick positioning, and the included wrench gives you a way to add tightening when a setup calls for it.

Before ordering, compare the mount's interfaces with your exact cage or handle and monitor.

If the monitor is heavy or the rig will move frequently, check the support requirements for those components and make sure you can secure the mount as intended.

Who should skip it

Skip this mount if your support lacks the matching locating point or your monitor cannot use the specified top connection. A different interface or adapter may be needed, and that compatibility should be established before purchase.

Choose another style if your workflow needs a long arm to place the screen farther from the camera, or if you need a clearly specified load limit for a heavier monitor.

How the SMALLRIG 6314 Mount Fits a Camera Rig

Positioning across orientations

The 6314's 360-degree pan and 180-degree tilt address two kinds of adjustment: changing where the screen faces and changing its angle.

Support for portrait mounting while retaining tilt adjustment can help when a shoot alternates between vertical and horizontal framing. The design is compact, so consider where the monitor needs to sit relative to the camera before choosing it.

Locating connections and twist resistance

At the support end, the 3/8-inch-16 locating screw is intended for an ARRI locating hole.

At the monitor end, a retractable 1/4-inch-20 locating screw and built-in pins are intended to secure compatible equipment, while the silicone pad adds a protected contact surface.

These features depend on matching connection points; confirm your gear has the required interface instead of assuming a standard threaded connection alone will use every locating feature.

Adjustment and tightening

The thumb knob is designed to make mounting and tilt damping adjustment straightforward, with damping adjustable for devices of different weights. The included L-shaped Allen wrench provides additional tightening.

Since no load capacity is supplied in the product description, match the mount to your monitor and the support system's own guidance, especially if repeated repositioning is part of the workflow.

Compactness versus reach

The listed weight of 75.6 grams and the direct mounting format make the 6314 appealing when a streamlined rig is the priority.

That format also means buyers should think about reach: the description focuses on mounting and angle adjustment, not an extending arm.

If you need to move a screen well away from the cage or handle, check whether your rig requires a separate positioning component.

Alternatives to SMALLRIG 6314 Mount

Camera Mounts & Clamps alternative

SMALLRIG 2905B Field Monitor Mount Holder with Cold Shoe
4.7/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 2905B Field Monitor Mount Holder with Cold Shoe

Compare the 2905B if your cage or handle offers a cold shoe and that attachment better fits your rig.

The 6314 is the more relevant fit when you need its ARRI locating connection and explicit portrait mounting support; check each mount against your monitor and support interfaces.

  • The 2905B mounts through a cold shoe, supports 5-inch and 7-inch monitors, and offers 180-degree tilt and 360-degree swivel.
  • Its tilt tension uses a thumbscrew, while swivel tension is adjusted with the supplied Allen wrench.
  • The SMALLRIG 6314 uses a bottom 3/8-inch-16 ARRI locating screw and supports portrait or landscape installation with 360-degree pan and 180-degree tilt.

Camera Mounts & Clamps alternative

SMALLRIG 2732 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SMALLRIG 2732 9.8-Inch Magic Arm Clamp Kit

Choose the 2732 for a setup where clamping to a bar, shelf, or other listed surface and gaining arm reach matter more than a direct ARRI locating connection.

The 6314 better suits a compatible camera rig that needs a compact monitor mount with portrait and landscape positioning.

  • The 2732 pairs a 9.8-inch articulating arm with a super clamp that opens from 15 mm to 54 mm.
  • Its double ball heads rotate 360 degrees, and the kit uses 1/4-inch screws at the arm ends.
  • The 6314 is a compact monitor mount with pan and tilt adjustment and locating interfaces at both ends; its description does not specify an extended arm.

Is SMALLRIG 6314 Mount Worth It?

The SMALLRIG 6314 Adjustable Camera Monitor Mount is worth considering for a camera-rig owner who wants a lightweight, directly mounted monitor support with broad angle adjustment and portrait as well as landscape placement.

Its locating features and silicone pad are useful design details when the connected equipment has matching interfaces.

Check compatibility carefully and account for the unspecified load capacity before buying, particularly for a heavier monitor.

If your priority is a longer reach or a different attachment style, choose a mount designed around that need; for a compatible compact rig, the 6314 offers a focused set of practical adjustments.

Your review at a glance

SMALLRIG 6314 Adjustable Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SMALLRIG 6314 Adjustable Camera Monitor Mount

A compact, angle-adjustable monitor mount for camera-rig users who need landscape or portrait positioning and compatible anti-twist connections.

  • Model 6314 monitor mount for compatible monitors and accessories attached through a 1/4-inch-20 threaded hole or locating hole.
  • Designed to mount on a camera cage, top handle, or another support accessory.
  • Top retractable 1/4-inch-20 locating screw, locating pins, and silicone pad for compatible monitor connections.
  • Bottom 3/8-inch-16 locating screw for an ARRI locating hole.

Written by

projectsandimas.com Editorial Team

Editorial team

projectsandimas.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG 6314 Adjustable Camera Monitor Mount

SMALLRIG 6314 Adjustable Camera Monitor Mount

A compact, angle-adjustable monitor mount for camera-rig users who need landscape or portrait positioning and compatible anti-twist connections.

  • Model 6314 monitor mount for compatible monitors and accessories attached through a 1/4-inch-20 threaded hole or locating hole.
  • Designed to mount on a camera cage, top handle, or another support accessory.
Check Video Reviews on Amazon