The SmallRig Field Monitor Mount Holder review is for camera operators who want to angle a compact field monitor without adding a long articulating arm.
Its cold shoe base, adjustable tilt and swivel, and anti-twist details make it a focused option for cage or handle rigs.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact tilt-and-swivel mount for camera operators who want to position a 5- or 7-inch monitor from a cold shoe or compatible support.
- Designed to support 5- and 7-inch camera monitors through a cold shoe mount on a camera cage or handle.
- Tilts up to 180 degrees and swivels 360 degrees to adjust the monitor's viewing position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- Built-in locating pins and a silicone pad are designed to help limit monitor twisting and scratching.
Pros
- Broad tilt and swivel movement makes it easier to set a monitor viewing angle around a camera rig.
- Hand-adjustable tilt tension makes routine angle changes convenient.
Consider before buying
- The tilt capacity changes by angle, so buyers must check the relevant limit for their monitor and position.
- Swivel tension adjustment requires the included Allen wrench rather than a tool-free control.
Read the full review summary
This mount combines a cold shoe connection with a top 1/4-inch screw, allowing it to support a 5- or 7-inch camera monitor on a compatible camera cage or handle.
It can tilt up to 180 degrees and swivel 360 degrees, so the screen can be repositioned for different viewing angles without moving the camera rig itself.
The upgraded design makes tilt tension adjustable by hand with a thumbscrew, while swivel tension uses the included Allen wrench.
Locating pins and a silicone pad are intended to help secure compatible monitors and limit twisting or surface scratches.
This is a compact, purpose-built mount for a lightweight camera setup; buyers should match their device weight and intended tilt angle to the listed load limits.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
Offers up to 180-degree tilt and 360-degree swivel for flexible screen positioning.
Mounting options
The cold shoe base, bottom 1/4-inch threaded hole, and top 1/4-inch screw cover common camera-rig connections.
Monitor retention features
Locating pins and a silicone pad address twisting and surface contact for compatible monitors.
Tension adjustment
Tilt tension adjusts with a thumbscrew, while swivel tension can be adjusted with the supplied Allen wrench.
Load guidance
Angle-specific capacity limits are useful, though buyers need to check them against their monitor and setup.
Portability
At 76 g with a folded size of 78 × 67 × 42 mm, it adds little bulk to a camera rig.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors through a cold shoe mount on a camera cage or handle.
- Tilts up to 180 degrees and swivels 360 degrees to adjust the monitor's viewing position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- Built-in locating pins and a silicone pad are designed to help limit monitor twisting and scratching.
- A cold shoe adapter is on the bottom, alongside a 1/4-inch threaded hole; the top has a 1/4-inch screw for a monitor or compatible accessory.
- The stated load capacity varies with tilt: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.
- Weighs 76 g and measures 78 × 67 × 42 mm when folded.
Pros and Cons of SmallRig Monitor Mount
Pros
- Broad tilt and swivel movement makes it easier to set a monitor viewing angle around a camera rig.
- Hand-adjustable tilt tension makes routine angle changes convenient.
- Locating pins and a silicone contact pad provide useful anti-twist and scratch-conscious details.
- Compact and lightweight, with both cold shoe and 1/4-inch connection options.
Consider before buying
- The tilt capacity changes by angle, so buyers must check the relevant limit for their monitor and position.
- Swivel tension adjustment requires the included Allen wrench rather than a tool-free control.
- The top uses a 1/4-inch screw, so confirm that your monitor or accessory connection is compatible before buying.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider this holder if your setup uses a camera cage or handle with a cold shoe and you want a compact way to position a 5- or 7-inch monitor.
Its 180-degree tilt and 360-degree swivel offer substantial angle adjustment without the extra reach of a longer arm.
It is particularly suited to operators who expect to reposition the screen during setup and want to adjust tilt tension by hand.
Before mounting, check the weight of the device and use the capacity listed for the tilt angle you plan to use. The mount's 1/4-inch top screw and locating-pin layout should also suit your monitor.
The small folded dimensions and 76 g weight make it a practical candidate for compact rigs where bulk matters. For a stable setup, follow the product's instruction to retighten the 1/4-inch knurled screw with the Allen wrench.
Who should skip it
Skip this design if your rig lacks a compatible cold shoe or 1/4-inch threaded connection, or if your monitor's weight exceeds the limit for your chosen tilt angle.
Choose another mounting approach if you need an extended arm to position a monitor away from the camera, since this holder is a compact mount rather than a long articulating arm.
Using the SmallRig Monitor Mount on a Camera Rig
Angle range and practical positioning
The 180-degree tilt and 360-degree swivel allow substantial repositioning, which can help when a camera operator changes stance or viewing direction.
The mount remains attached at the rig's connection point, so its compact form is best for nearby screen placement rather than creating extra reach.
Tension and setup routine
Tilt tension is adjusted at the thumbscrew, making it straightforward to tune the hinge during setup. Swivel tension uses the supplied Allen wrench, so keep it accessible when making adjustments.
Retightening the 1/4-inch knurled screw is part of the recommended security check.
Monitor fit and anti-twist details
The top 1/4-inch screw provides the monitor connection, while locating pins and a silicone pad are designed to resist twisting and scratching.
Check that your monitor has a compatible interface and that the pins align with its mounting points; the mount is specified for 5- and 7-inch monitors.
Capacity depends on tilt
The listed maximum changes with the tilt position: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.
A buyer should use the limit for the intended angle and keep the complete device setup within that figure rather than relying on a single general payload number.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSMALLRIG Camera Monitor Mount 6313
Compare these if you want a similar compact SmallRig monitor mount.
The reviewed holder's description gives explicit load limits by tilt angle, while the 6313 specifically calls out portrait or landscape installation and a retractable locating screw; choose based on which documented setup detail better matches your rig.
- The 6313 also has a cold shoe base, bottom 1/4-inch threaded hole, 180-degree tilt, 360-degree pan, and adjustable tilt damping.
- Its description highlights horizontal and vertical monitor installation and a retractable locating screw.
- The SmallRig Field Monitor Mount Holder has a cold shoe base, 1/4-inch threaded hole, adjustable tilt and swivel, locating pins, and a silicone pad.
- Its description focuses on 5- and 7-inch monitors and provides angle-specific load limits.
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Articulating Magic Arm 2066B
Choose the 2066B if your priority is a longer arm that can place a monitor farther from its attachment point and your rig can accept its threaded ends.
Choose the reviewed holder for a smaller cold shoe-based monitor mount with a stated 5- or 7-inch monitor focus and angle-specific capacities.
- The 2066B is a 9.8-inch articulating arm with 1/4-inch threads on both ends and double 360-degree ball-head adjustment. Its description lists a 213 g maximum weight recommendation.
- The SmallRig Field Monitor Mount Holder connects through a cold shoe or bottom 1/4-inch thread and provides tilt and swivel adjustment in a compact body.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder is worth considering for a compact camera rig that needs broad screen-angle adjustment and a direct cold shoe connection.
Its light weight, thumbscrew-adjusted tilt, and anti-twist details make it a well-focused monitor mount.
Check compatibility and the capacity at your intended tilt angle before purchase, and plan to use the included wrench for swivel tension and the recommended screw retightening.
If you need a longer reach, an articulating arm is a better fit.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact tilt-and-swivel mount for camera operators who want to position a 5- or 7-inch monitor from a cold shoe or compatible support.
- Designed to support 5- and 7-inch camera monitors through a cold shoe mount on a camera cage or handle.
- Tilts up to 180 degrees and swivels 360 degrees to adjust the monitor's viewing position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- Built-in locating pins and a silicone pad are designed to help limit monitor twisting and scratching.